⬟ What a Make-or-Buy Decision Is and Why the Financial Framework Matters :
A make-or-buy decision is the choice between producing a component, performing a service, or completing a process in-house versus purchasing it from an external supplier. This typically arises when a job worker quotes a price for work done in-house, when the MSME considers buying equipment to bring outsourced work in-house, or when a service currently performed by staff could be contracted to a specialist. The fundamental financial principle: only relevant costs are compared. Relevant costs are those that actually change as a result of the decision. In the make option, relevant costs are the avoidable in-house costs: those that would actually cease if the work is no longer done internally. In the buy option, the relevant cost is the external price plus additional costs of managing the supplier: freight, quality inspection, coordination effort, and delivery risk. Costs incurred regardless of the decision, such as rent for space that remains rented, salaries of permanent employees who remain employed, and depreciation on equipment already purchased, are not relevant and must be excluded from the comparison.
A small MSME plastic component manufacturer in Ahmedabad, Gujarat produces a sub-assembly in-house at Rs. 34 per unit (Rs. 18 raw materials, Rs. 6 direct labour, Rs. 2 variable overhead, Rs. 8 allocated fixed overhead). A supplier quotes Rs. 28 per unit. Full cost comparison says: outsource, save Rs. 6. Relevant cost analysis: if outsourced, which costs are actually avoided? Raw materials Rs. 18: avoidable. Direct labour Rs. 6: avoidable only if workers are on piece-rate or can be redeployed productively. Variable overhead Rs. 2: avoidable. Fixed overhead Rs. 8: NOT avoidable if factory space and supervision remain. If direct labour is avoidable: avoidable cost = Rs. 26. Supplier price Rs. 28. Outsourcing costs Rs. 2 more per unit. If direct labour is NOT avoidable: avoidable cost = Rs. 20. Supplier price Rs. 28. Outsourcing costs Rs. 8 more per unit. Only if the fixed overhead is also genuinely eliminated (space given up, headcount reduced) does outsourcing become cheaper than making.
⬟ Why the Relevant Cost Framework Changes Make-or-Buy Outcomes :
Applying the relevant cost framework produces three specific benefits. The first is avoiding decisions that increase actual costs. Comparing external price to fully loaded in-house cost, including overhead that will not be eliminated, produces a misleading result. The relevant cost framework prevents this error, which is the most common and most expensive make-or-buy mistake. The second is identifying the value of freed capacity. If outsourcing frees in-house capacity (machinery, floor space, worker time) that can be redirected to higher-margin work, the incremental contribution from that redeployment is a genuine benefit of the outsource decision that a pure cost comparison misses. The third is building a structured decision habit. Owners who apply a consistent financial framework to make-or-buy decisions develop a more rigorous approach to all resource allocation choices: hire versus contract, buy equipment versus rent, add a service in-house versus partner with a specialist.
A medium MSME food processing company in Pune, Maharashtra was outsourcing label printing at Rs. 3.2 lakh per year and considering a digital label printer (Rs. 4.8 lakh, 5-year life). In-house annual cost: Rs. 1.4 lakh variable plus Rs. 96,000 depreciation = Rs. 2.36 lakh. Saving: Rs. 84,000 per year. Payback: 5.7 years, beyond the equipment's useful life. CA recommendation: retain external printing unless volume grows significantly. A small MSME engineering services company in Chennai, Tamil Nadu was using contract engineers at Rs. 45,000 per month each and considering permanent hires at Rs. 38,000. The CA identified the full employment cost: employer PF (12%), ESI, gratuity, and insurance brought the effective cost to Rs. 47,500 per month. Contract was cheaper and offered flexibility to scale with project demand. The owner retained the contract arrangement.
For small and medium MSME owners, the make-or-buy decision affects cost structure, capacity utilisation, supply chain risk, and the allocation of management attention. An MSME that outsources too much loses control over quality, delivery, and cost; one that makes too much in-house ties up capital in equipment and people that may not be fully utilised. The relevant cost framework helps owners make each decision on its specific financial merits rather than as a general philosophy. For CAs advising MSMEs, structuring make-or-buy analyses correctly, particularly identifying avoidable versus unavoidable costs, is a direct value-add that prevents expensive incorrect decisions.
⬟ How MSMEs Currently Make Make-or-Buy Decisions :
Most small MSME owners make make-or-buy decisions by comparing the full allocated in-house cost to the external quote, without distinguishing between avoidable and unavoidable costs. This approach systematically overestimates the savings from outsourcing in cases where fixed costs are not eliminated, and can lead to a series of outsourcing decisions that reduce the variable cost base while leaving the fixed cost base intact and therefore unchanged. A growing body of MSME owners also make make-or-buy decisions based on the owner's preference for control or the CA's general advice to keep or outsource certain functions, without a specific quantitative analysis. While qualitative judgement has a legitimate place in these decisions, the financial analysis should always come first.
⬟ How Make-or-Buy Thinking Is Evolving for Growing MSMEs :
The expansion of the Indian job work and contract manufacturing ecosystem is making the buy option more accessible and reliable for MSME manufacturers. GST provisions for job work (Section 143 of the CGST Act) provide a clear framework for sending goods for processing without triggering a supply, reducing the tax complexity of outsourcing arrangements. Digital platforms connecting MSMEs with specialist service providers, including manufacturing capacity marketplaces and freelance professional networks, are expanding the buy options available to growing businesses. As these platforms mature, the transaction cost of outsourcing (finding, contracting, and managing external suppliers) decreases, which changes the financial calculus of make-or-buy decisions by reducing the hidden costs of the buy option.
⬟ The Six-Step Relevant Cost Framework for Make-or-Buy Decisions :
The correct make-or-buy analysis follows six steps. Identify the current in-house cost buildup: list every cost component, including materials, direct labour, variable overhead, and allocated fixed costs. Classify each cost as avoidable or unavoidable. Avoidable costs cease if the work is outsourced: materials, piece-rate labour, variable overhead. Unavoidable costs continue: rent for space that stays rented, permanent employee salaries with no productive redeployment, depreciation on equipment already owned. Calculate total avoidable in-house cost. This is the correct make-side figure. Determine full external cost: supplier price plus freight, quality inspection, coordination effort, and delivery risk. Compare avoidable in-house cost to full external cost. The lower figure indicates the financially better option. Assess the opportunity value of freed capacity. If outsourcing frees capacity that can generate additional contribution margin, add this as a benefit on the outsource side.
● Step-by-Step Process
List the current in-house cost per unit for the component or service: materials, labour, variable overhead, and allocated fixed overhead. For each cost element, ask: would this cost actually stop if we outsourced? If yes, mark avoidable. If it continues regardless, mark unavoidable. Sum only the avoidable costs. This is the true in-house cost for comparison. Get the full external cost: supplier price plus freight, quality checking, and coordination cost. Compare avoidable in-house cost to full external cost. The option with the lower number is cheaper on financial grounds. Identify what happens to the freed capacity. If freed workers, machines, or space generate additional contribution margin, add that to the benefit of outsourcing. If freed capacity sits idle, it adds no value. Document the analysis and revisit when the external price or cost structure changes significantly.
● Tools & Resources
A simple Excel or Google Sheets template with two columns, one for the make option and one for the buy option, with rows for each relevant cost component, is sufficient for most MSME make-or-buy analyses. The key is separating the avoidable costs clearly from the unavoidable costs in the make column. For job work arrangements, ICAI's guidance on relevant costing and the GST job work provisions under Section 143 of the CGST Act are relevant references. The CA advising the business should be the primary resource for structuring the analysis correctly.
● Common Mistakes
Comparing the external quote to the fully allocated in-house cost without identifying avoidable costs is the most consequential mistake. The fully allocated cost includes overhead that continues regardless of the outsourcing decision. If that overhead is not eliminated, the business pays both the external supplier and the unchanged fixed costs. The relevant cost framework prevents this. Treating permanent worker salaries as avoidable when there is no specific plan to reduce headcount is the second mistake. If the workers remain employed with no alternative productive use, the salary cost continues regardless of the outsourcing decision. Before treating labour as avoidable, confirm the specific action: redundancy, productive redeployment, or natural attrition. Ignoring the hidden costs of outsourcing is the third mistake. Inbound freight, receiving and inspection, supplier management time, quality reject handling, and the cost of supply disruption all add to the external cost. For critical components where delivery reliability matters, the risk premium for outsourcing should be explicitly estimated and included.
● Challenges and Limitations
Some costs are partially avoidable: outsourcing a process may allow part of a factory space to be sublet, or one of three supervision positions to be eliminated. These partial savings are legitimate but require specific planning and follow-through to be realised. An avoidable cost that is not actually eliminated in practice remains a real cost. Qualitative factors must be weighed alongside the financial analysis: quality control, protection of proprietary methods, supplier reliability, strategic importance of the capability, and the owner's preference for managing in-house versus external relationships. The financial framework identifies the cheaper option on relevant cost grounds. It does not automatically determine the right decision when non-financial factors are material.
● Examples & Scenarios
A small MSME auto components manufacturer in Rajkot, Gujarat produced a bracket in-house at Rs. 210 per unit (Rs. 62 materials, Rs. 48 permanent labour, Rs. 22 variable overhead, Rs. 78 allocated fixed overhead). A Pune supplier quoted Rs. 185. Full cost comparison suggested outsourcing saves Rs. 25. Relevant cost analysis: avoidable costs = Rs. 62 materials plus Rs. 22 variable overhead = Rs. 84 per unit. Labour (permanent, no alternative work) and fixed overhead are unavoidable. External cost: Rs. 185 plus Rs. 12 freight = Rs. 197. Outsourcing costs Rs. 197 versus avoidable in-house cost Rs. 84: outsourcing is Rs. 113 more expensive per unit. Decision: continue in-house. A medium MSME garments exporter in Ludhiana, Punjab considered outsourcing embroidery to a job worker at Rs. 28 per piece (in-house cost Rs. 35: Rs. 18 permanent labour, Rs. 4 materials, Rs. 13 overhead). At 12,000 pieces per month, avoidable in-house costs are only Rs. 4 materials. Outsourcing costs Rs. 24 more per unit than avoidable costs, Rs. 2.88 lakh per month more. However, the freed space could generate Rs. 42,000 per month incremental contribution from a new cutting operation. Net financial impact: Rs. 2.88 lakh extra cost minus Rs. 42,000 benefit = Rs. 2.46 lakh per month net cost of outsourcing. Decision: retain in-house.
● Best Practices
Build every make-or-buy analysis around avoidable versus unavoidable costs. When uncertain whether a cost is avoidable, identify the specific action that would eliminate it. If no specific action exists, the cost is unavoidable and should not be counted as a saving. Reassess make-or-buy decisions periodically. External supplier prices change. In-house cost structures shift as equipment depreciates, headcount changes, and overhead allocations are revised. A decision correct three years ago may no longer be correct today. Document the analysis in writing, including the avoidable cost identification, the external cost calculation, and the opportunity value assessment for freed capacity. This creates a reference point for future reviews and prevents informal re-opening of settled decisions.
⬟ Disclaimer :
This content is intended for informational and educational purposes only and does not constitute professional financial, accounting, or business management advice. Make-or-buy decisions involve both financial and non-financial factors that are specific to each business's circumstances. MSME owners should work with a qualified chartered accountant or business advisor to apply the relevant cost framework to their specific situation.
