⬟ What Depreciation Is and How It Works Under the Companies Act 2013 :
Depreciation is the systematic allocation of a fixed asset's cost over its useful life. A machine bought for Rs.10 lakh with a 10-year life is worth less each year. Depreciation records this as an expense in the profit and loss account and reduces the asset's book value on the balance sheet. Under the Companies Act 2013 and Schedule II, depreciation must be based on the useful life of each asset. Schedule II prescribes useful lives for common categories: general plant and machinery 15 years, computers 3 years, office furniture 10 years, buildings 30 to 60 years. A residual value of 5% of original cost must be kept as the floor value of the asset. Two methods are permitted. The Straight Line Method, SLM, charges an equal amount each year: cost minus residual value, divided by useful life. For a Rs.10 lakh asset with 10-year life and 5% residual, annual SLM depreciation is Rs.95,000 per year. The Written Down Value method, WDV, charges depreciation as a fixed percentage of the opening book value each year. Because the book value reduces annually, the depreciation charge is higher in early years and lower in later years. WDV front-loads the expense compared to SLM for the same asset.
A delivery vehicle purchased for Rs.12 lakh with a 10-year useful life and 5% residual value produces annual SLM depreciation of Rs.1.14 lakh. Under WDV at the applicable rate, Year 1 depreciation would be higher, say Rs.2.4 lakh, declining each subsequent year. By Year 5, the two methods produce significantly different book values for the same vehicle and different profit figures for the same business.
⬟ Why Correct Depreciation Matters for Tax, Compliance, and Creditworthiness :
Correct depreciation ensures the balance sheet reflects the actual written-down value of the business's assets accurately. This matters when the business applies for a loan secured against fixed assets, when a buyer or investor assesses the asset base, or when the business is sold. An overstated asset value from insufficient depreciation misleads every reader of the balance sheet. Consistent and correctly calculated depreciation supports a clean audit. When the depreciation in the accounts matches the fixed asset register and the auditor can verify the calculation independently, the audit process is faster and fewer queries are raised. The Income Tax Act permits depreciation as a deduction, but under different rules from the Companies Act. Understanding both sets of rules prevents the three-number mismatch problem described in the introduction: keeping them separate but reconcilable is the correct approach.
A printing equipment company in Coimbatore, Tamil Nadu purchased a Rs.20 lakh offset machine and chose SLM under the Companies Act useful life of 15 years for general plant. Annual SLM depreciation: approximately Rs.1.27 lakh. A second company with an identical machine applied WDV. At the applicable WDV rate for general plant, Year 1 depreciation was approximately Rs.3.8 lakh. In Year 1, Company B reports Rs.2.53 lakh lower profit than Company A from the same machine, same revenue, same other costs. By Year 7, cumulative depreciation and book values diverge significantly. Neither is wrong. They have made different but equally permitted choices with different implications for reported profit, tax, and asset values.
For the MSME owner, the choice of depreciation method and its correct application determines the reliability of the profit figure and the asset values presented to lenders. For the chartered accountant, a well-maintained fixed asset register makes the audit process faster and reduces the risk of compliance notices. For lenders assessing secured loan applications, accurate asset book values are the foundation of the security assessment.
⬟ How Depreciation Compliance Works for MSMEs Under the Current Rules :
The Companies Act 2013 and Schedule II represent a significant change from the earlier Companies Act 1956 rules, which prescribed specific depreciation rates rather than useful lives. The shift to useful life-based depreciation from April 2014 required many MSMEs to recalculate the carrying value of existing assets based on the remaining useful life under the new rules. In practice, many small private limited companies have asset registers that were last properly updated at incorporation or during the transition year and have not been maintained since. Additions are sometimes added at cost but not properly classified or assigned a useful life. Disposals are sometimes not recorded at all, leaving retired assets on the books and distorting both the asset total and the accumulated depreciation. The Income Tax rules under Section 32 use a block of assets approach with prescribed rates rather than individual asset useful lives. This produces a different depreciation figure from the Companies Act calculation and the two must be maintained separately and reconciled in the tax working papers.
⬟ How Asset Accounting Practices Are Evolving for MSMEs :
Accounting software adopted by MSMEs increasingly includes fixed asset modules that automate depreciation calculations under both the Companies Act and Income Tax rules simultaneously, generating the reconciliation between the two automatically. This reduces the risk of manual calculation errors and keeps both sets of records updated in parallel. As MSMEs formalise their financial management systems for credit access and investor readiness, asset registers maintained on proper software rather than manual spreadsheets are becoming a more common expectation from auditors and lenders.
⬟ How to Maintain a Fixed Asset Register and Calculate Depreciation Correctly :
A fixed asset register is the master record of every fixed asset owned. For each asset it records: asset name and description, purchase date, original cost, useful life under Schedule II, residual value, depreciation method, accumulated depreciation to date, and current book value. When a new asset is purchased, it is added at cost including installation and freight but excluding GST input credit claimed. The asset category determines the Schedule II useful life. If management believes the actual life is shorter, a shorter life can be used with disclosure in the notes. When an asset is sold or scrapped, it is removed from the register. The difference between sale proceeds and book value at disposal is a gain or loss in the profit and loss account. Assets scrapped but left on the register distort both gross block and accumulated depreciation figures. Depreciation is calculated at year end. For SLM: cost minus residual divided by useful life. For WDV: opening book value multiplied by the WDV rate derived from the useful life formula.
● Step-by-Step Process
At year end, pull the fixed asset register and verify every asset owned appears on it. Any asset purchased during the year must be added at cost with the correct useful life. Identify assets sold, scrapped, or retired during the year. Remove them from the register, record disposal proceeds, and calculate the gain or loss. Calculate depreciation for each active asset using the selected method, SLM or WDV, and update accumulated depreciation and closing book value. Verify that gross block, accumulated depreciation, and net block from the register match the fixed asset schedule in the draft financial statements. Any difference indicates an unreconciled entry. Ask the chartered accountant to prepare Income Tax depreciation separately under the block of assets method and provide a written reconciliation between Companies Act and Income Tax depreciation for the year.
● Tools & Resources
A fixed asset register can be maintained in Microsoft Excel or Google Sheets using a simple template with columns for asset name, purchase date, cost, useful life, residual value, method, annual depreciation, accumulated depreciation, and net book value. Accounting software such as Tally, Zoho Books, or similar tools include fixed asset modules that calculate depreciation automatically under both Companies Act and Income Tax rules and generate the Schedule III notes format. Schedule II of the Companies Act 2013 is publicly available on the MCA website at mca.gov.in and lists the prescribed useful lives for all standard asset categories. Your chartered accountant is the essential guide for classifying new assets, choosing between SLM and WDV, and preparing the Income Tax depreciation reconciliation.
● Common Mistakes
Not recording asset disposals is the most common error. Businesses frequently scrap or sell equipment and do not update the asset register or the books. The retired asset continues to appear on the balance sheet and continues generating depreciation, both of which are incorrect. Applying Income Tax depreciation rates to the company accounts instead of the Companies Act useful life method produces figures that are neither Companies Act compliant nor necessarily correct for tax. The two calculations must be run separately and the results must be reconciled, not merged. Adding assets at cost without including installation, freight, or commissioning costs understates the capitalised value and therefore understates depreciation over the useful life of the asset.
● Challenges and Limitations
For businesses with many small assets such as tools, furniture, or equipment purchased in small quantities, maintaining an individual record for every item is administratively burdensome. The common practical approach is to capitalise individual assets above a stated threshold, typically Rs.5,000 or Rs.10,000, and expense smaller purchases as revenue items. This threshold should be disclosed in the accounting policies. The distinction between capital expenditure and revenue expenditure is a recurring judgement call. A repair that restores an asset to working condition is revenue expenditure. An improvement that extends useful life or adds new capability is capital expenditure. Incorrect classification affects both the asset register and the profit calculation. This judgement is one of the areas where the chartered accountant's input is most valuable at year end.
● Examples & Scenarios
A small textile processing unit in Surat, Gujarat had not updated its fixed asset register for four years. When the auditor requested the register, it showed three machines sold two years earlier and was missing two new machines purchased the previous year. The reconstruction required: removing three disposed assets and recording disposal gains, adding two new machines at cost with correct useful lives, and recalculating four years of depreciation. The balance sheet gross block was overstated by Rs.18.4 lakh and net block by Rs.7.2 lakh before correction. The auditor raised a prior period adjustment. An annual review would have caught each issue in the year it occurred.
● Best Practices
Review the fixed asset register at least once a year, at or before year end. For a business with fewer than 50 asset entries, this takes under an hour. Verify every asset owned is listed, every disposal has been removed, every new purchase added at the correct cost with the correct useful life, and the depreciation method is applied consistently. Choose one method, SLM or WDV, and apply it consistently across all assets of the same class. Changing methods requires disclosure as a change in accounting policy and comparative restatement. Consistency simplifies the audit and avoids questions about method changes. Keep the Companies Act asset register and the Income Tax block calculation as two separate documents. Ask the CA to provide a written reconciliation between the two each year. This document resolves any future tax notice about depreciation differences.
⬟ Disclaimer :
Depreciation rules under the Companies Act and the Income Tax Act are subject to change through amendments and judicial interpretation. The useful lives in Schedule II and the Income Tax block rates described in this article reflect the general framework and may not cover every asset class or special situation. Always confirm the applicable depreciation treatment with a qualified chartered accountant before finalising the annual accounts.
